0086-0755-84161382
Floor 1, Bldg. 3, 6 Cichang Rd., Aoyi Village, Henggang St., Longgang Area, Shenzhen, Guangdong, China (Mainland)
Cnc Mach3 Usb Handwheel 4 Axis Pulse 50ppr Optical Encoder Generator Mach3 Handwheel
Performance and Parameters:
| No | Performance or Parameters Description |
| 1 | The RF is Standard with 2.4G ISM,the Tx power is 0DB and the RF sensitivity is -98DB |
| 2 | The RF has 64 channels ,the channel gap is 1Mhz |
| 3 | The transmission distance is further than 15 meters with no barrier |
| 4 | The protocol Designed with high performance,Low power consumption,Automatic learning ID Number |
| 5 | To jump frequency Adaptively when nosed,which can work 2.4G wierless Mic,Wlan and Bluetooth etc.devices |
| 6 | 32 sets Wireless Handle work fine at the same time in one room,with no-interference each other |
DC Description
| Name | Voltage | Current | Note |
Wireless USB Receiver | 4.5v~5.0v | <50mA | |
| Wireless Handle | 1.5v~3.0v | <2mA | Use of time More than 2 months Use Two 2000MAH Battery |
| Note:Wireless Handle Need Two AA Battery,When the Low Voltage indicator LED light,the battery is completely ,Proposed to replace the battery | |||
RF Performance Description
1. The RF is Standdard with 2.4G ISM,the Tx power is 0DB and the RX sensitivity is -98DB
2. The RF has 64 channels,the channel gap is 1Mhz
3. The protocol Designed with high performance;Low power consumption;Automatic Learning ID Number
4. To jump frequency Adapttively when noised,which can work with 2.4G wireless Mic,Wlan and Bluetooth etc.devices.
5. 64 sets Wireless Handle work fine at the same time in one room,with no-interference each other has the function of the hand wheel,100PPR the manual pulse generator output display,real-time display of the machine the workpiece coordinates,mechanical coordinates
6. Coordinates X,Y,and Z three-axis with the screen display
Picture:
How to Install the handle wheel?
Before using the hand wheel,install the driver file,mode of operation is as follows:
1.When MACH3 is installed,there will be a folder created named "Plugins" in the MACH3 folder.This folder is the location to put and Plugin files that you want Mach3 to know about.Place"XHC-ShuttlePro.dll" in the MACH3Plugins folder.Check and make sure it is there.
2.Setup diver for Probe Z surface function;M930.m1s copy the installation directory to the MACH3.mach3macrosmach3Mill
3.Now that the XHC-ShuttlePro.dll file is in MACH3Plugins,the next step is to connect the huttlePro.If you are certain that your ShuttlePro is working and your hardware is working then you can simply plug in the ShuttlePro to one of the USB ports
4.once the ShuttlePro is connected ,start MACH3 and go to the "Config" menu choice and select "ConfigPlugins".You should see the ShuttlePro choice with a green checkmark means that Mach3 found the ShuttlePro on tartuo.Click the "CONFIG"in yellow and set the buttons as you wish.
5.once you have the proper button selected in the MACH3 ShuttlePro Plugin ConFIG menu, your Shuttle device should be working properly.
RF Performance Description
Packaging:
Packaging material: Carton/Wooden case with foam inside.
Shipping:
A. 3-5 workdays shipping from China by Air/Express(DHL,FedEx,UPS,EMS etc.)
1.We provide you the friendly English User manual or operating videos for free.
2.24 hours technical support by email or calling.
3.Warranty: 1 year free, 2-3 years cost price and free technical support always.
4.Free training to make sure you master the operating of our products.
Our company specializes in the R&D, production and marketing various types of CNC advertising engraving machine, woodworking engraving machine, marble engraving machine, computer cutting plotter, laser engraving machine, laser cutting machine, crafts laser engraving machine, laser engraving machine and other equipment.
1) This is the first time I use this kind of machine, is it easy to operate?
There is an English manual also a guide video that show you how to use machine.
If you still have any question, please contact us by e-mail / skype/ phone /trademanager online service.
2) If machine have any problem after I receive it, how can I do ?
We provide 1 year warranty, if you there is any problem when you receive CNC machine, just feel free to contact us.
3)What is your MOQ ?
1 set machine, mixed order is also welcomed.
4) How can I buy this machine from you?
A. Consult us about this product on line or by e-mail.
B. Negotiate and confirm the final price , shipping , payment methods and other terms.
C. Send you the proforma invoice and confirm your order.
D. Make the payment according to the method put on proforma invoice.
E. We prepare for your order in terms of the proforma invoice after confirming your full payment.
And 100% quality check before shipping.
F.Send your order by air or by sea.
5)Why i choose you ?
A. Because we are the manufacturer, we can keep the quality for you.
B. At the same quality grade, our products' price is better.
C. At the same products' price level, our service is better
D.Short delivery time 2-3 days after confirming the ordery.
Different Engraving Vedio for your reference, more You Tube link welcome to contact us.
IC Grinding machine
Aluminum:
Wood:
Bakelite:
Nuclear:
Ivory:
Plastic meter box cutting:
Plastic housing:
Hollow cutting:
Acrylic:
Ceramic tile:
Mach3 Install Vedio:
If you are interested in our machine, welcome to send us an inquiry, we have Professionals to servise you immediately, here CUSTOMERS FIRST.
